CITROEN BERLINGO L1 (2008-2018 / 2nd generation) PLYWOOD VAN RACKING - BRAND NEW.
A DOUBLE RACKING UNIT COMBINING 4 STANDARD SHELVES WITH
5 SLOPING TRAYS FOR HOLDING TOOL/SERVICE CASES AND THE LIKE.
Each sloping tray has depth 300mm and can hold items up to 476mm wide and 208mm high.
The standard shelving unit is 720mm wide and 300mm at its deepest point. Deepest shelf has a usable depth of 222mm.
Made entirely from quality 'Q-Mark' hardwood plywood.
Our plywood is 100% hardwood throughout, NOT cheap hardwood faced plywood with a soft (usually poplar) core.
These units are extremely strong and robust as they are constructed using a combination of mortise-tenon and housing joins. Shelves are grooved back and front and then glued and screwed and sit in mortises (or grooves) cut into the end panels. Shelf dividers are also recessed into the shelf backs and fronts.
Will NOT fit the forthcoming 3rd generation van which will be released any time now. These new vans can be identified by their very sleek headlights. Please check carefully.
If opting for a courier delivery (as opposed to a collection in person) then please note that we ship these units partially disassembled in two parcels. Assembly is a simple matter of tapping the tray/shelf assemblies (which come fully assembled) into the mortises cut into the end panels and then screwing tight. Assembly should take no more than 20 minutes.
Full instructions will be emailed following purchase.
Designed to fit vans which have been plylined.
One of our images shows the interior of the van we used when creating our units. Note the single sheet of plywood covering the upper cavities of the driver's side of the van without extending beyond the said cavities. Our unit will fit best if your van is similarly plylined - though any discrepancies are not normally untoward in any way.
Also, our unit is designed to fit vans whose ply-lining kits leave the wheel-arches uncovered, or are covered by a very slim box. If the wheel-box is too deep, then the unit will require some modification (or simply remove the ply box).
Installation is a simple matter of using the fixings to attach to your van's plylining. The two units can be bolted or screwed together.
Note that, as with all curved racking units, some trimming of the two end panels may be required depending upon the nature of your van's ply-lining.
Click the specification tab (above) for more details (including dimensions etc.)
|Width||Total width 1220mm.|
|Number Of Shelves||4 shelves, 5 sloping trays|
|Shelf depths||Varied. Widest shelf has a usable interior depth of 222mm. All sloping trays are 300mm deep, 476mm wide and 208mm high.|
Citroen Berlingo L1 (2008-2018 / 2nd generation) off-side racking unit - tool case storage
- Brand: Choice Racking
- Product Code: CRPR_BERLINGOPARTNERL1_2008_TOOL_1
- Availability: In Stock
- Shipping Costs: £20.00